Frequently Asked Questions
Answers about ordering, shipping, custom 3D printing, materials and product care.
Orders & Payments
How much does shipping cost within Australia?
Standard tracked shipping within Australia costs AUD $10.55 per order, regardless of the number of products. Other shipping services, where available, are confirmed separately.
Can I cancel or change an order?
Contact us as soon as possible. Changes or cancellation may be possible before production starts. After work has begun, requests are considered individually, without affecting your consumer rights.
How long does a refund take?
Where a refund is due, we aim to process it within 10 business days. The time it takes to appear in your account may also depend on the payment provider.
Is customisation free?
Simple adjustments may be included without additional design charges. More involved design work will be assessed and quoted before chargeable work starts.
When is my order confirmed?
Sending an enquiry through our website does not place or pay for an order. We'll confirm the order details, availability, applicable pricing and payment arrangements with you before proceeding. If anything in the confirmation looks incorrect, please contact us.
Will I receive a receipt or invoice?
We provide an email receipt for an order and a downloadable PDF invoice where available; a customer account is not required.
Will I get updates about my order?
We send order confirmation, production-start and dispatch notifications by email, and contact you if a significant delay occurs.
How long will my order take to manufacture?
Manufacturing times vary by the product and current workload. We do not promise a fixed production timeframe for every order; contact us if timing is important.
Materials & Product Care
Why are there visible layers on my product?
Layer lines and minor surface variations are normal characteristics of 3D printing. They do not necessarily indicate a defect, but please contact us if a product appears faulty or fails to meet its agreed specifications.
How should I care for my product?
Follow any care guidance on the product page. In general, avoid unsuitable heat, chemicals or mechanical abuse.
Are your products suitable for sunlight, saltwater or rain?
Suitability depends on the product and its materials. We do not make unverified UV, saltwater or waterproof claims; contact us before ordering if the environment is demanding.
Can you recreate a broken or discontinued plastic part?
We may assess non-safety-critical replacement parts from measurements and photographs. Technical feasibility and intellectual property rights must be considered.
Can I request a specialist filament or supply my own?
We manufacture using our selected supported materials. We do not accept customer-supplied filament or source special materials for individual requests as a standard service.
Are 3D-printed products environmentally friendly?
We manufacture on demand where practical and aim to avoid unnecessary waste. We do not claim that all printing materials are biodegradable or locally recyclable.
Are the published dimensions exact?
Dimensions are nominal and minor manufacturing variations may occur. Unless specifically agreed, we do not publish guaranteed numerical tolerances.
Will the product colour match the photos exactly?
Colours may vary between batches, lighting and displays. Website photos are representative rather than a guarantee of exact colour matching.
Will your product never scratch the equipment it touches?
Material choice and fit may help reduce scratching, but we cannot guarantee completely scratch-free contact in every condition.
Can I modify a 3D-printed product myself?
You may modify your purchased item, but changes can affect fit, strength or function. This does not remove statutory consumer rights for issues unrelated to your modifications.
Are your products resistant to petrol, diesel, oil or cleaners?
We recommend avoiding fuels, oils, solvents and aggressive cleaning chemicals, which may damage printed plastics. Clean with mild soap and water where suitable; contact us if chemical exposure is expected.
Can your products withstand high temperatures?
Heat suitability depends on material, design and use. Excessive heat may deform products; avoid engines and exhausts unless specifically approved. Contact us before high-temperature applications.
How long will a 3D-printed product last?
Lifespan varies with material, use and environment. Wear and ageing can occur; no specific service life is guaranteed unless expressly stated. Contact us about possible manufacturing defects.
Are your products resistant to vibration and impact?
Repeated movement, vibration and impact may affect durability. We do not guarantee specific resistance ratings. Avoid heavy-load or safety-critical uses and enquire before demanding applications.
Can I order a sanded, polished or painted finish?
Products are supplied with their standard 3D-printed finish, including normal layer lines and minor variations. We do not offer additional sanding, polishing or painting services.
Can I order a different colour?
We may be able to use a suitable alternative colour from existing stock. Availability and any charges are confirmed before manufacturing; special filament purchases and exact matches are not guaranteed.
Can I request flexible instead of rigid plastic or vice versa?
Alternative materials from our supported range may be considered individually. Changing material can affect fit, flexibility and strength, and may require additional design or production work.
Can you provide material datasheets or compliance certificates?
We provide general material types such as PLA, PETG or TPU 95A but do not routinely supply technical datasheets, independent test reports or compliance certificates. Discuss mandatory documentation needs before purchase.
Are products solid, and can I request 100% infill?
We choose the appropriate internal structure and printing settings. Products may have solid areas or infill; we do not offer customer-selected infill percentages. More infill does not always improve performance.
Can I remove and reinstall your 3D-printed products multiple times?
Some of our products, including certain flexible clips and protective covers, are designed to be removable and reusable.
However, suitability for repeated removal depends on the product's design, material and intended use.
Repeated bending, stretching or excessive force may cause wear, deformation or damage over time.
We recommend handling products carefully and checking for cracks, looseness or other signs of damage before reinstalling them.
Not all products are designed for frequent removal, and we do not guarantee a specific number of installation cycles unless explicitly stated.
If you need a product that will be removed and reinstalled regularly, please contact us before ordering so we can discuss its suitability.
Can I remove an adhesive-mounted 3D-printed accessory without damaging the surface underneath?
Adhesive-mounted accessories may be removable, but removal depends on the adhesive, mounting surface and installation conditions.
Customers are responsible for choosing and removing any adhesive and assessing its suitability for their mounting surface. 3DFabrify does not provide adhesive-removal instructions.
Removal may leave adhesive residue, marks or discolouration, or cause damage to paint, gelcoat or other surface finishes.
We cannot guarantee damage-free removal. This does not limit any rights you may have under Australian Consumer Law.
Custom Design & Fitment
How do I check whether a product will fit?
Review the dimensions and compatibility information in the product description. Where fit is uncertain, contact us before ordering with relevant measurements and photos.
Can I buy the 3D model or STL file?
We sell physical products, not downloadable STL or CAD files. We do not normally distribute our design files.
Can you print a 3D model I provide?
We may be able to manufacture a suitable customer-supplied design. Email the file and requirements for an individual assessment and quotation.
Who owns a design I send you?
You retain the rights you already have in your own files. We use supplied designs to assess or fulfil your request and do not share them without permission. Rights to newly commissioned design work must be agreed separately in advance.
Will I approve the design before printing?
Where appropriate, we will ask you to confirm a drawing or preview before manufacturing. A physical prototype is not included automatically.
What if my custom product doesn't fit?
Contact us with photos and measurements. We assess the cause and provide appropriate remedies for our mistakes or faults; customer-supplied measurement errors may require a paid redesign.
Can you print a prototype first?
A prototype may be available by request where feasible. Design, manufacturing and shipping charges are agreed before proceeding.
Can you make a product from a sketch or photograph?
We may be able to develop a product from photos, sketches and measurements. Any significant design work is quoted and agreed in advance.
Can you make safety-critical or structural parts?
No. Our products are intended for general-purpose use, not safety-critical, load-bearing or structural applications.
Are your accessories genuine manufacturer parts?
Unless expressly stated otherwise, these are independent aftermarket products. References to compatible equipment do not imply endorsement or affiliation with its manufacturer.
Do your products include screws or mounting hardware?
Only the components expressly listed in the product description or accepted quotation are included. Hardware is not supplied by default.
Can you install the product for me?
No. We manufacture and supply products but do not offer physical installation or professional fitting services.
Can you put my name or logo on a product?
We consider personalisation individually. Simple adjustments may be free; more complex design work is quoted. You must have permission to use supplied logos.
Can I provide a 3D scan of an existing part for custom manufacturing?
Yes! If you have a 3D scan of an existing part, we may be able to use it as a reference for creating a replacement or custom accessory.
Please contact us by email with your scan file and details of what you would like to manufacture.
We'll review whether the scan contains sufficient information and is suitable for our design and manufacturing process.
Depending on its quality, we may need additional photographs, measurements or design work to produce a usable 3D model.
Please note that 3D scans are not always dimensionally accurate or complete. We cannot guarantee exact fitment based solely on scan data.
Additional design or reconstruction charges may apply. We'll discuss and agree on any costs before proceeding.
You must have the necessary rights or permissions to reproduce the design.
Shopping & Website
How can I contact support?
Customer support is available by email. Please include your order details and a description of your question so we can help.
How do you handle my personal information?
Our Privacy Policy explains how personal information is collected and used for enquiries, orders and other relevant services.
Do you have social media pages?
Where social media channels are available, links are provided on the website. Contact us directly for order support.
Are customer testimonials genuine?
We publish only customer testimonials that have been provided genuinely, with appropriate permission. We do not fabricate reviews.
Can I order products shown on your site?
Yes. You can send an enquiry about a published product through our website. We confirm availability, final pricing, delivery and payment arrangements before accepting an order. If an agreed, paid order cannot be supplied, we'll discuss an alternative or provide an appropriate refund.
Do you offer discount codes?
We do not currently offer standard coupon codes or promotional discounts. Bulk pricing may be discussed individually.
Is the website accessible?
We aim to make the website usable and accessible to customers, including on mobile devices. Please contact us if you experience an accessibility issue.
Can I see multiple images of a product?
Where available, product listings include photographs from different angles. Images are illustrative; dimensions and descriptions should be checked before purchase.
How can I browse your catalogue?
Browse our product categories to find relevant accessories. Contact us if you cannot find what you need.
How do you recommend related accessories?
Where relevant, product pages may show other accessories selected as related to that product.
How do I choose a size or variation?
Where a product has selectable variants, choose the option that matches your requirements. Contact us before ordering if you need a different configuration.
Where can I learn about the business?
Visit the About Us page to learn more about 3DFabrify and its products.
Safety & Bulk Orders
Can I get a quote for a bulk order?
Yes. Email us with the product and quantity you need. Bulk pricing is assessed individually rather than guaranteed automatically.
Are your products safe for food or drinking water contact?
No. We do not offer products represented as suitable for direct food or drinking-water contact.
Are your connector covers waterproof or electrically certified?
No. Unless expressly verified otherwise, our connector covers are general-purpose protective accessories, not certified waterproof enclosures or electrical insulation.
Are your products safe for children or pets?
Our products are intended for general adult use and are not children's toys or pet accessories. Small or detachable parts may present swallowing hazards; keep them away from children and pets.
Are your products fire-resistant or flame-retardant?
Standard products are not designed or certified to resist fire. Printed plastics may melt or burn. Keep them away from flames, sparks and hot equipment; do not use for fire-safety purposes.
Can I attach your products using screws, adhesives or cable ties?
Suitable mounting methods vary by product. Follow the intended method and ask before using alternatives. Incorrect fasteners or adhesives may damage products or equipment. We do not install products.
Will my product arrive assembled?
Most standard products arrive complete. Some larger or custom items may require assembly; we will explain relevant requirements and included components before purchase.
Do your products come with installation guides?
Product descriptions provide basic intended-use information. We do not generally offer separate step-by-step installation manuals or fitting services; general questions can be emailed.
Can I order a sample before a larger order?
Existing products can normally be purchased singly. Custom samples and test pieces may be available by request, with agreed design, manufacturing and shipping charges.
Will bulk-order items be identical?
We aim for consistent fit and appearance, but minor printed variations are normal. Discuss any critical dimensions or appearance requirements before ordering; special checks may cost extra.
Can bulk-order products be packaged or labelled separately?
We may arrange individual packaging, separation into sets or basic identification labels by prior agreement. Extra handling charges may apply. Retail-ready or custom-branded packaging is not standard.
Can I arrange recurring supply?
We consider recurring quantities and repeat orders individually. Pricing and timing depend on current capacity and materials; fixed schedules or reserved capacity are not guaranteed without agreement.
Can I order multiple dimensions or configurations together?
Yes, different configurations may be quoted together. Provide measurements and quantities for every version; additional design/setup fees may apply and feasibility must be confirmed.
Custom Production
Can you make my order urgently?
Urgent requests may be considered individually, but priority processing and specific deadlines cannot be guaranteed.
Is there a minimum quantity for custom products?
There is no fixed minimum quantity for custom enquiries. We assess feasibility and pricing for each request.
Can I mail you an original part as a sample?
We do not normally accept physical parts by post for reverse engineering. Please provide clear photographs and measurements instead.
What happens if you cannot make my product?
We will contact you to discuss an appropriate alternative. If we cannot supply the agreed product, an appropriate refund will be provided.
What measurements do you need for a custom aerial clip?
We may require the rail diameter, aerial diameter and angle between them, plus clear photographs. Exact requirements depend on the product.
Can I ask you to delete my custom design files?
You may request deletion of files and measurements by email. We may retain information required for legal or other valid obligations; deletion may prevent future reorders using the same design.
Can I see photographs of my finished custom product before shipping?
If you request photos when placing your order, we may be able to email a few before dispatch. Photos are for reference, not a separate formal approval stage; advance notice is essential.
Can you replace a custom product I lost or accidentally damaged?
We may be able to reproduce a previous design if it remains available. Current manufacturing and shipping charges apply; faulty or transit-damaged items are assessed separately under consumer rights.
How large can you 3D-print a product?
Maximum dimensions depend on equipment, geometry and material. We may consider manufacturing a large design in sections where appropriate. Please send dimensions and photos for assessment.
Do you accept custom orders from businesses?
Yes. We consider commercial, workshop and reseller enquiries, including custom components, small production runs and repeat orders, subject to feasibility and a quotation.
Can I resell your products under my own brand?
Resale, unbranded and white-label requests may be considered individually. Branding, pricing and intellectual property arrangements must be agreed beforehand; exclusivity is not automatic.
Can you ship products directly to my customers?
Direct fulfilment may be possible by prior agreement. Contact us with volumes and destinations to agree packaging, pricing and support. We do not currently offer an automated dropshipping service.
Will I own exclusive rights to a commissioned design?
Commissioning a product does not automatically grant exclusivity. Exclusive ownership, manufacturing or distribution rights must be agreed in writing before design work starts and may cost extra.
Are custom design fees refundable if manufacturing does not proceed?
Agreed design work already completed is generally chargeable for a change-of-mind cancellation. Unperformed work and any applicable refunds are assessed under the agreed terms and Australian Consumer Law.
What if I do not respond to design questions or approval requests?
We will pause the custom order and may follow up by email. Once details are supplied, we'll review the next steps; prolonged delays may affect availability or quotations.
Can I order a replacement clip, cover or individual component without buying the complete product again?
Yes! Depending on the product, we may be able to manufacture and supply individual replacement components without requiring you to purchase a complete set or assembly.
If you need a replacement part, please contact us with the original product name or order details and a description of the component you require.
We may request photographs or measurements to confirm the required part and its compatibility.
Availability depends on the design and whether the component can be manufactured separately.
Please note that replacement components may have minor differences in colour, appearance or dimensions compared with earlier production batches.
Any applicable manufacturing and shipping charges will be confirmed before proceeding.
If your request relates to a faulty or incorrectly supplied product, we'll assess it separately in accordance with our returns policy and your rights under Australian Consumer Law.
Can I reorder a custom 3D-printed product that you previously made for me?
Yes! If we previously manufactured a custom product for you, we may be able to produce additional copies.
Please contact us with your original order details, product description or photographs so we can identify the design.
If the original design files are still available and suitable for production, we may be able to reuse them without repeating the full design process.
In some cases, we may need to reconfirm measurements, mounting requirements or other specifications before manufacturing.
Please note that we do not guarantee indefinite storage or availability of previous design files, materials or colours.
Repeat orders are subject to current pricing, production availability and shipping charges. Any additional design work or applicable costs will be confirmed before proceeding.
Minor variations in appearance or dimensions may occur between production batches.
Can you design a custom 3D-printed organiser, tray or storage compartment to fit a specific space?
Yes! We offer custom 3D-printed storage systems, including modular organisers, trays, dividers and interchangeable compartments designed for particular storage spaces.
Depending on your requirements, we can develop a configurable layout with compatible inserts or expansion modules, allowing supported designs to be adapted as your storage needs change.
Please contact us with accurate measurements, photographs or drawings of the space, details of the items to be stored and your preferred compartment layout.
We'll assess the available space, operating conditions, suitable materials and module connections, then discuss a proposed design and quotation before manufacturing.
For supported equipment and storage areas, fitment can be validated against agreed dimensions, suitable reference information or a prototype where applicable. Any required physical testing or prototype iterations will be agreed as part of the project.
Compatible modules and future additions depend on the approved design, its revision and the continued availability of suitable design files and materials. We will confirm compatibility and current pricing before a repeat or expansion order.
Custom storage systems are not intended to restrain hazardous, heavy or safety-critical equipment. Load capacity, secure retention and resistance to movement are not guaranteed unless specifically validated.
Design, prototyping, fitment validation, manufacturing and additional modules may incur charges. We'll confirm the agreed scope and all applicable costs before proceeding.
Can you make a replacement knob, dial or control grip for existing equipment?
Yes! Depending on the application, we may be able to design and manufacture replacement knobs, dial grips and similar components for non-safety-critical equipment.
This may be useful when an original plastic knob is missing, damaged or no longer available.
Please contact us before ordering with photographs, accurate measurements and details of the equipment and original component.
In particular, we may need the shaft dimensions, attachment method and information about how the component operates.
We'll assess whether the replacement can be manufactured using suitable materials and geometry. A prototype or fitment adjustment may be required.
We cannot guarantee compatibility with every manufacturer's equipment or identical performance to an original component without appropriate validation.
We do not manufacture replacement parts for safety-critical controls, steering, throttles, emergency switches or other applications where failure could create a hazard.
Additional design, prototyping or manufacturing charges may apply. Any applicable costs will be confirmed before proceeding.
Shipping & Delivery
Do you inspect products before dispatch?
We perform visual and product-specific checks as appropriate before dispatch, without claiming independent certification.
Can I add another item to an order I already placed?
Contact us before dispatch. We may be able to combine items where practical; any pricing or shipping differences are confirmed first.
Can I collect my order locally?
Local collection may be possible by prior arrangement. We do not provide a public walk-in pickup address.
Can you deliver to a PO Box or Parcel Locker?
We can generally deliver to eligible Australia Post PO Boxes and Parcel Lockers where the selected service supports them.
Can I have an order sent to someone else as a gift?
You can use a recipient's address for a standard order, but we do not provide a dedicated gift-wrapping or gift-message service.
Can I update my shipping address after ordering?
Email us before dispatch with the updated address. We will make the change where feasible; changes may not be possible once shipped.
What happens if my parcel is returned to you?
Contact us and we'll review the reason. Additional delivery costs may apply for an incorrect customer-provided address, while our own errors will be corrected appropriately.
What if tracking says delivered but I haven't received the parcel?
Please contact us with your order details so we can investigate the delivery and help determine an appropriate outcome under applicable consumer rights.
What if my order is missing an item or contains the wrong product?
Contact us with the details. We'll assess the issue and correct errors for which we are responsible without an additional charge.
What should I do if my order arrives damaged?
Contact us with photos of the damage and packaging where possible. We'll assess the problem and provide an appropriate remedy under your consumer rights.
Can one order be sent to multiple addresses?
Each confirmed order has one shipping address. If you need items delivered to different addresses, send separate enquiries for each destination so we can confirm the applicable shipping arrangements and costs.
Can you hold my completed order until a later date?
Contact us before dispatch. We may be able to delay shipping by agreement, depending on the circumstances.
How are products packed for delivery?
We use protective packaging appropriate to the products and aim to avoid unnecessary excess material.
What if I don't receive an order confirmation?
Using our website's Enquiry Cart prepares an email draft; it does not place or pay for an order. Make sure you actually send the enquiry from your email application. If you have already agreed an order with us and expected a confirmation, check your spam or junk folder and contact us by email before sending a duplicate enquiry.
What if the Australia Post tracking link isn't working?
Please check with Australia Post for tracking updates. You can also contact us if you need help with your order.
Can I request signature on delivery or use Safe Drop?
Signature delivery may be possible if requested before dispatch and may cost extra. Safe Drop is managed under Australia Post's applicable delivery arrangements.
Can I add Extra Cover to shipping?
For eligible parcels, Australia Post Extra Cover may be available by advance request at additional cost. Your statutory consumer rights remain unaffected.
Will items with different manufacturing times ship separately?
We normally dispatch all items in an order together once they are ready. We will contact you about significant delays.
Can I request Express Post?
Express Post may be available on request with an agreed charge. Faster postage does not mean faster manufacturing.
Advanced Customisation
Can I ask for revisions to a custom design?
Reasonable minor revisions within the agreed scope may be included. Major changes or extra design work can incur fees agreed beforehand.
How long is a custom quotation valid?
Our written quotations are generally valid for 14 calendar days unless otherwise stated.
How is a custom product priced?
Every custom project is quoted individually. Send requirements and measurements for a quotation; applicable design fees and shipping will be disclosed before any chargeable work. We do not provide internal cost breakdowns.
Is a custom manufacturing quote free?
Initial enquiries and preliminary quotations are free with no obligation. Detailed design, complex technical assessment and prototypes may cost extra, but only with your prior agreement.
Can an accepted custom quotation change?
The accepted price covers the agreed scope. Customer-requested changes may need a revised quote, but we will not increase the agreed price without approval; consumer rights remain unaffected.
Will I pay the design fee again when reordering?
Usually not if the same approved design remains available and needs no changes. Current manufacturing and shipping costs apply; missing designs or new specifications may require chargeable work.
Will I pay extra if printing fails?
No. We cover our failed prints and manufacturing errors. If a reprint is needed because supplied measurements were wrong or specifications change, any applicable extra charges are agreed first.
Can you add magnets, inserts or fasteners?
Additional hardware may be incorporated into custom products where feasible and expressly agreed. Availability, suitability and any charges are confirmed before manufacture; safety-critical applications are excluded.
Can you make hinges, slides or snap-fit parts?
Simple moving features may be possible after reviewing your design. Extra assembly or design work may cost more. We do not guarantee cycle life or accept safety-critical or heavy-load mechanisms.
Can you add drainage, ventilation or cable openings?
Custom openings may be possible if suitable for the design. Provide sizes and locations; changes and fees are agreed before printing. Openings do not guarantee drainage, cooling, waterproofing or electrical safety.
Can you add raised text, engraved-style names or identification?
We may include raised or recessed lettering directly in a printable design. Small text may be unclear; simple changes may be free, while complex designs may cost extra. Confirm text and placement in advance.
Can one product use more than one colour?
Some designs may support multi-colour printing from available materials, including contrasting lettering. Not all combinations work; extra charges may apply and exact matches or edges are not guaranteed.
Can you make translucent or transparent 3D-printed products?
Translucent or partly transparent parts may be possible with suitable available materials. Layer lines and internal structure affect clarity; we cannot guarantee glass-like transparency or optical properties.
Can you estimate how much a product weighs?
Approximate product weights may be provided on request when enough information is available. Actual weight may differ, and packaging or shipping materials are excluded.
Can you print very small or detailed parts?
We can assess small and detailed designs individually. Thin walls, tiny holes and fine details may require changes and may not reproduce reliably; fees and feasibility are confirmed before proceeding.
Can you make thicker or reinforced versions?
We may alter wall thicknesses or add geometric reinforcement where appropriate. Changes affect fit, weight and flexibility; they do not guarantee higher strength. Extra work may be quoted.
Can you add grooves, grip patterns or raised textures?
We may design textured surfaces directly into an item where suitable. Special patterns may incur charges and do not guarantee slip resistance, especially when wet or oily. No cosmetic coating is offered.
Can you combine TPU with rigid plastic in one product?
A mixed-material assembly may be possible using supported materials and separately printed components. Joining strength, waterproof seals and particular mechanical performance are not guaranteed.
Can you modify or resize a product I have received?
Contact us with the requested adjustment. We may suggest minor changes or quote a newly printed version; physical modification may not be practical. Faults are handled separately under consumer rights.
What 3D files can I submit?
Common files such as STL, 3MF and STEP may be reviewed, alongside sketches and drawings. Some formats or models need repair or conversion; additional preparation work is quoted before starting.
Do you check and repair 3D model files?
We check basic printability before accepting the order. Minor corrections may be free at our discretion; complex repairs or redesigns may cost extra. This is not an engineering or fitment certification.
Who checks dimensions in a model I supply?
You are responsible for the dimensions and intended fit of your supplied design. We may review particular measurements on request, while remaining responsible for our own manufacturing errors and agreed services.
Can you scale a 3D model up or down?
We may resize or scale suitable files. Simple scaling may be free; changing individual features may need chargeable design work. Scaling can alter fit, wall thickness and clearances.
Can you reduce support marks on a visible surface?
Let us know which surfaces matter most before ordering. We may adjust printing orientation where appropriate, but marks and layer lines can remain; we do not offer sanding or polishing.
Can you make a left-hand, right-hand or mirrored version?
We may produce a mirrored design after reviewing dimensions and mounting arrangements. Simple mirroring may be free, while more complex changes may cost more. Opposite-side fit is not guaranteed.
Can you adjust how tightly a cover or clip fits?
We may adjust dimensions and clearances by request. Accurate measurements are essential; some changes may be free and others quoted. Exact gripping force or fit is not guaranteed without validation.
Can you make 3D-printed parts with threaded holes for screws or bolts?
Yes! Depending on the design and intended application, we may be able to incorporate threaded holes or suitable fastening arrangements into custom 3D-printed products.
Some designs may use threads printed directly into the plastic, while others may be better suited to metal threaded inserts or captive nuts.
If you require a threaded connection, please contact us before ordering with the required screw or bolt dimensions and details of how the part will be used.
We'll assess the design, material and available space to determine which options may be suitable.
Additional design work or hardware charges may apply. Any applicable costs will be confirmed before manufacturing.
Please note that we do not provide certified load, torque or pull-out resistance ratings unless explicitly stated. We do not accept safety-critical or structural load-bearing applications.
Can you make 3D-printed covers or enclosures with grooves for rubber seals or gaskets?
Yes! Depending on the design, we may be able to incorporate grooves or other features intended to accommodate rubber seals or gaskets.
If you have specific sealing requirements, please contact us before ordering with the relevant dimensions, gasket specifications and details of the intended application.
We'll assess whether the requested features can be incorporated into the product and whether the selected material is suitable.
Please note that the inclusion of a gasket or sealing groove does not automatically make a product waterproof, dustproof or suitable for immersion.
We do not guarantee specific water or dust protection ratings unless explicitly stated and supported by appropriate testing.
Rubber seals, gaskets or other additional components are supplied only when specifically agreed.
Additional design, material or manufacturing charges may apply. We'll confirm any applicable costs before proceeding.
Can you add ventilation holes or airflow openings to a custom 3D-printed enclosure?
Yes! Depending on the product design, we may be able to incorporate ventilation holes, slots, grilles or other airflow openings into a custom enclosure.
If you need ventilation features, please contact us before ordering with details of the equipment, preferred opening locations and any relevant dimensions.
We'll review whether the requested modifications are suitable for the enclosure design and selected material.
Please note that ventilation openings may affect the enclosure's strength, appearance and protection against dust or water.
While these features may allow air circulation, we do not guarantee specific cooling performance or safe operating temperatures without appropriate testing.
We do not manufacture safety-critical electrical or thermal protection components.
Additional design or manufacturing charges may apply. Any applicable costs will be confirmed before proceeding.
Can you make the edges or corners of a 3D-printed product more rounded or smooth?
Yes! Depending on the design, we may be able to modify a product to incorporate more rounded corners, curved edges or chamfers.
These adjustments may improve handling comfort, appearance or clearance around surrounding equipment.
If you require specific edge or corner modifications, please contact us before ordering with details of the areas you would like changed.
We'll review whether the requested modifications are suitable for the product's design, material and intended use.
Minor adjustments may be possible without additional design charges, while more complex modifications may incur a fee. Any applicable costs will be confirmed before manufacturing.
Please note that rounded edges do not guarantee a completely smooth or scratch-free surface. Normal 3D-printing layer lines and other surface characteristics may remain.
We do not provide sanding, polishing or other post-print cosmetic finishing services.
Can you add cable entry holes or pass-through openings to a custom 3D-printed enclosure?
Yes! Depending on the product design, we may be able to incorporate cable entry holes, slots, pass-through openings or mounting provisions for cable glands and grommets.
If you require custom cable openings, please contact us before ordering with the cable dimensions, connector measurements and details of the intended installation.
We may request additional photographs or measurements to confirm the required opening size and position.
We'll assess whether the requested features are suitable for the enclosure's geometry, material and intended use.
Please note that cable openings may affect the product's strength and protection against dust or water. Adding a cable gland mounting provision does not automatically make an enclosure waterproof or IP-rated.
Cable glands, grommets, seals and other hardware are supplied only when specifically agreed. We do not guarantee electrical safety, cable strain relief or sealing performance without appropriate validation.
Additional design or manufacturing charges may apply. Any applicable costs will be confirmed before proceeding.
Can you customise the mounting hole positions, sizes or spacing on a 3D-printed product?
Yes! Depending on the design, we may be able to adjust mounting hole diameters, positions or spacing to suit your equipment.
We may also be able to add mounting holes, countersunk recesses or other suitable fastening features.
If you require changes, please contact us before ordering with accurate measurements, photographs or a diagram showing the required mounting arrangement.
We'll review whether the requested modifications are suitable for the product's geometry, material, wall thickness and intended use.
Minor modifications may be possible without additional design charges, while more complex changes may incur a fee. Any applicable costs will be confirmed before manufacturing.
Please note that mounting compatibility depends on accurate measurements and installation conditions. We cannot guarantee exact fitment without appropriate validation.
We do not manufacture safety-critical or structural load-bearing components.
Can you design a 3D-printed product for adhesive or double-sided tape mounting?
Yes! Depending on the design, we may be able to incorporate flat mounting surfaces, recessed areas or other features intended for adhesive or double-sided tape installation.
If you require adhesive mounting, please contact us before ordering with details of the installation surface, intended use and preferred adhesive or tape.
We'll assess whether the requested mounting features are suitable for the product's geometry and selected material.
Please note that adhesive performance depends on the tape or adhesive used, surface preparation, installation conditions, temperature, moisture and the forces applied during use.
We do not guarantee adhesion strength, durability or resistance to vibration and weather unless explicitly supported by appropriate testing.
Adhesives and mounting tapes are supplied only when specifically agreed. Adhesive mounting must not be relied upon for safety-critical or structural load-bearing applications.
Additional design or manufacturing charges may apply. Any applicable costs will be confirmed before proceeding.
Can you make a custom positioning or drilling template to help me install an accessory accurately?
Yes! Depending on the application, we may be able to design and manufacture custom positioning templates, alignment guides or hole-marking templates.
These may be useful when installing brackets, covers, equipment mounts or other accessories that require specific mounting positions.
Please contact us before ordering with the relevant measurements, photographs or drawings and details of how the template will be used.
We'll review whether the requested template can be manufactured using our supported materials and printing processes.
Please note that 3D-printed templates are not certified precision tools. We cannot guarantee installation accuracy or compatibility without appropriate validation.
Customers are responsible for independently verifying all measurements, mounting positions, clearances and installation conditions before drilling or making permanent modifications.
Additional design and manufacturing charges may apply. Any applicable costs will be confirmed before proceeding.
Can you design a 3D-printed accessory to fit a curved or uneven mounting surface?
Yes! Depending on the application, we may be able to customise a product's mounting geometry to better suit a curved, rounded or irregular surface.
This may be useful for boat consoles, fibreglass panels, equipment housings and other non-flat mounting locations.
Please contact us before ordering with photographs, accurate measurements and details of the mounting surface and intended application.
Depending on the complexity of the surface, we may also request additional dimensions, a physical template or suitable 3D scan data.
We'll review whether the requested geometry can be manufactured using our supported materials and printing processes.
Please note that exact surface contact, fitment or load distribution cannot be guaranteed without appropriate validation. Customers should verify compatibility before permanent installation.
Additional design, prototyping or manufacturing charges may apply. Any applicable costs will be confirmed before proceeding.
We do not manufacture safety-critical or structural load-bearing components.
Can you add a retaining strap, tether or lanyard attachment point to a removable cover?
Yes! Depending on the design, we may be able to add tether holes, retaining loops or other attachment features to custom 3D-printed covers and accessories.
Some designs may also accommodate a flexible retaining strap or similar arrangement.
If you require a retention feature, please contact us before ordering with details of the product, intended attachment location and how it will be used.
We'll assess whether the requested feature is suitable for the product's geometry, material and intended application.
Straps, cords and additional attachment hardware are included only when specifically agreed.
Please note that retention features may wear, stretch or break during use. We cannot guarantee that a tethered product will never become detached or lost.
These features are not intended for safety-critical equipment retention, lifting or securing heavy objects.
Additional design or manufacturing charges may apply. Any applicable costs will be confirmed before proceeding.
Can you add soft protective pads or cushioning to a 3D-printed accessory?
Yes! Depending on the design, we may be able to incorporate features intended to accommodate protective pads, cushioning materials or flexible contact surfaces.
These features may be useful for accessories that contact painted surfaces, fibreglass, gelcoat, metal or other equipment.
If you require additional protection, please contact us before ordering with details of the contact surface, installation method and intended application.
We'll assess whether a suitable printed design or provision for a protective pad can be incorporated into the product.
Separate foam, felt, rubber or adhesive-backed pads are supplied only when specifically agreed.
Please note that cushioning or flexible materials do not guarantee protection against scratches, marks, vibration, wear or other damage. Performance depends on installation, contact pressure, environmental conditions and ongoing use.
Additional design, material or manufacturing charges may apply. Any applicable costs will be confirmed before proceeding.
Can you customise a 3D-printed cover to keep buttons, displays or indicator lights accessible or visible?
Yes! Depending on the design, we may be able to incorporate openings, recesses or cutouts that allow access to buttons, switches, displays or indicator lights.
If you require these features, please contact us before ordering with photographs, accurate dimensions and details of the equipment and controls.
We'll assess whether the requested modifications are suitable for the product's geometry, material and intended use.
Please note that openings may affect the cover's strength and its ability to protect against dust, water or accidental contact.
We cannot guarantee compatibility, waterproofing or specific environmental protection without appropriate testing.
Customers must ensure that essential equipment controls remain accessible and that the cover does not interfere with safe operation.
Additional design or manufacturing charges may apply. Any applicable costs will be confirmed before proceeding.
Can you add locating pins, alignment features or anti-rotation tabs to a custom 3D-printed accessory?
Yes! Depending on the design, we may be able to incorporate locating pins, alignment tabs, keys, slots or other features intended to assist with positioning and help reduce unwanted movement.
These features may be useful for mounting brackets, covers, equipment holders and other accessories that require a particular installation orientation.
If you need specific alignment or anti-rotation features, please contact us before ordering with accurate measurements, photographs or drawings of the mounting arrangement.
We'll assess whether the requested geometry is suitable for the product's design, material and intended use.
Please note that alignment features may help position a product, but they do not guarantee resistance to rotation, movement, wear or breakage under all operating conditions.
We cannot guarantee specified mechanical performance without appropriate validation, and these features must not be relied upon for safety-critical or structural retention applications.
Additional design, prototyping or manufacturing charges may apply. Any applicable costs will be confirmed before proceeding.
Can you design a 3D-printed accessory in two or more pieces for easier installation?
Yes! Depending on the application, we may be able to design split covers, two-piece clamps or other multi-piece accessories that can be installed around existing equipment.
This may be useful when removing or disconnecting the original equipment would be difficult or inconvenient.
If you require a split or multi-piece design, please contact us before ordering with accurate measurements, photographs and details of the available installation space.
We'll review whether the requested design can be manufactured using suitable materials and joining features.
Depending on the design, parts may be joined using clips, screws, interlocking features or other appropriate arrangements. Additional hardware is included only when specifically agreed.
Please note that split or multi-piece designs may have different strength, flexibility, fitment and wear characteristics compared with equivalent single-piece products.
We cannot guarantee retention, resistance to movement or mechanical performance without appropriate validation. These products must not be relied upon for safety-critical or structural applications.
Additional design, prototyping or manufacturing charges may apply. Any applicable costs will be confirmed before proceeding.
Can you add a finger grip, pull tab or small handle to make a 3D-printed cover easier to remove?
Yes! Depending on the product design, we may be able to incorporate finger grips, pull tabs, small handles, textured surfaces or other features intended to make a cover easier to handle or remove.
These features may be useful for protective caps, connector covers and accessories that need to be removed regularly.
If you require a custom grip or removal feature, please contact us before ordering with details of the product and how it will be used.
We'll assess whether the requested modification is suitable for the geometry, selected material, available space and intended application.
Please note that adding a grip or pull tab does not guarantee a specific removal force or prevent damage from repeated pulling, bending or excessive force.
Customers should handle removable parts carefully and check for wear or damage during use.
Minor modifications may be possible without additional design charges. More complex changes may incur a fee, which will be confirmed before manufacturing.
Can you make custom clips or holders to organise cables, hoses or small pipes?
Yes! Depending on the application, we may be able to design and manufacture custom clips, guides, brackets or holders to help organise cables, hoses and small pipes.
These products may be useful for routing non-critical cables and accessories around boat consoles, equipment compartments, dashboards or other suitable locations.
Please contact us before ordering with accurate measurements, photographs and details of the cables or hoses, mounting location and intended use.
We'll assess the required dimensions, routing arrangement, selected material and suitable mounting geometry.
Please note that 3D-printed holders may wear, deform or lose their grip over time, particularly when exposed to heat, vibration, sunlight or repeated movement.
We cannot guarantee specific retention strength, vibration resistance or long-term durability without appropriate validation.
We do not manufacture restraints for fuel lines, hydraulic systems, critical electrical wiring or other safety-critical applications.
Additional design, prototyping or manufacturing charges may apply. Any applicable costs will be confirmed before proceeding.
Still have questions? Contact us.