Materials & Care

Every part is printed in one of three materials. Choose based on where the part will live and what it must survive. The figures below are typical values for the grades we use; the linked manufacturer documents are the source for each claim.

Contents

PLA

What it is. Polylactic acid, a biopolymer made from renewable resources. It is the most common 3D printing material: easy to print, crisp detail, and a wide range of colours.

Good for. Indoor decorative and functional parts, jigs and fixtures, prototypes, and parts that do not face heat or sustained outdoor exposure.

Limits. PLA softens at relatively low temperatures — treat it as an indoor material and keep it away from hot surfaces, engine bays and prolonged sun. Over time, UV exposure makes it brittle and discoloured.

Temperature. Typical print range is about 190–220 °C. For service, keep well below roughly 50 °C sustained; it is not a high-heat material. (Polymaker PLA datasheet)

Indoor / outdoor. Indoor. Short outdoor use is fine, but sustained sun and rain will degrade it.

Cleaning and care. Wipe with a damp cloth and mild soap. Avoid prolonged soaking and harsh solvents.

PETG

What it is. A blend of PET and glycol — tougher and more chemical resistant than PLA, with good impact strength and a slightly flexible feel.

Good for. Functional parts that see regular use, parts exposed to water or mild chemicals, and items that need to survive drops and knocks.

Limits. PETG is more temperature resistant than PLA but is still a thermoplastic — it is not for engine-bay or high-heat use. Prolonged UV exposure will still degrade it over time.

Temperature. Typical print range is about 230–250 °C. Service temperature is commonly quoted around 70–80 °C depending on grade; check the grade-specific datasheet for a given part. (eSUN PETG datasheet)

Indoor / outdoor. Better suited to the outdoors than PLA, including wet environments, but it is not UV-proof for long-term sun exposure.

Cleaning and care. Easy to clean with mild soap and water; resistant to many common household chemicals.

TPU 95A

What it is. A flexible thermoplastic elastomer with a 95A Shore hardness — elastic, durable and able to stretch and rebound.

Good for. Gaskets, bumpers, grips, protective covers and parts that must absorb impact or flex with use.

Limits. Flexible parts have different tolerances than rigid ones — tight fits need to be designed for the material's stretch. Printing is slower than rigid materials.

Temperature. Typical print range is about 210–240 °C. Sustained service temperatures should stay within the grade's rated range (commonly around 70–80 °C); confirm the specific grade for heat-critical parts. (eSUN TPU datasheet)

Indoor / outdoor. TPU handles outdoor conditions, water and UV far better than PLA, making it the usual choice for marine and vehicle applications.

Cleaning and care. Wipe with a damp cloth; resistant to water and many common chemicals.